日本語 中文 English
HOME>Products>TKW-R (SBQ Type)

Capillary Film

TKW-R (SBQ Type)

It is a dual-use type that can be used with water paste and emulsion paste. TKW red color version

■Feature

  • 1.Emulsion pasting and water pasting are also suitable, and plate making is even easier.
  • 2.The film thickness is constant, uniform, and the surface RZ value is extremely low, so printability is excellent.
  • 3.The red color suppresses diffuse UV reflection and provides better resolution.
  • 4.High solvent resistance, applicable to CTS, PCB, graphics, general printing.
  • 5.It is recommended to use the pasting emulsion KBS-686 or KBS-691 and add 0.5-2g of the attached diazo to improve the resolution and printing resistance. However, please note that the pot life of the emulsion will be shortened after the addition.

■How to paste

Film pasting by emulsion application

  • ・Paste Emulsion KBS-686 or KBS-691(Add a photosensitizer in advance, stir and then filter and defoam)
  • ・Apply emulsion (once the printing surface) → (once on the squeegee surface) → (paste the film on the printing surface)
  • ・Be careful of static electricity and dust when pasting. (Too much pressure on the film can cause defects.)

Film pasting by water application

  • ・Degrease the mesh with a cleaning agent.
  • ・Rinse both sides thoroughly with water.
  • ・After draining the water, use an empty bucket to attach the film.
  • ・Squeeze with the tip of the bucket 2-3 times.
  • ・Be careful of static electricity and dust when pasting. (Too much pressure on the film can cause defects.)

■Manufacturing standard

Film Type
TKW-R(SBQ Type)
Emulsion thickness
15、20、25、35
Roll width
640mm、1000mm
Sheet size
200x200mm〜1000x1000mm
Paste Emulsion
KBS-686  ‧  KBS-691  ‧ Water

※Emulsion film thickness and sheet size can be manufactured upon consultation.
Go to the top of the page