It is a dual-use type that can be used with water paste and emulsion paste. TKW red color version
■Feature
- １．Emulsion pasting and water pasting are also suitable, and plate making is even easier.
- ２．The film thickness is constant, uniform, and the surface RZ value is extremely low, so printability is excellent.
- ３．The red color suppresses diffuse UV reflection and provides better resolution.
- ４．High solvent resistance, applicable to CTS, PCB, graphics, general printing.
- ５．It is recommended to use the pasting emulsion KBS-686 or KBS-691 and add 0.5-2g of the attached diazo to improve the resolution and printing resistance. However, please note that the pot life of the emulsion will be shortened after the addition.
■How to paste
Film pasting by emulsion application
- ・Paste Emulsion KBS-686 or KBS-691(Add a photosensitizer in advance, stir and then filter and defoam)
- ・Apply emulsion (once the printing surface) → (once on the squeegee surface) → (paste the film on the printing surface)
- ・Be careful of static electricity and dust when pasting. (Too much pressure on the film can cause defects.)
Film pasting by water application
- ・Degrease the mesh with a cleaning agent.
- ・Rinse both sides thoroughly with water.
- ・After draining the water, use an empty bucket to attach the film.
- ・Squeeze with the tip of the bucket 2-3 times.
- ・Be careful of static electricity and dust when pasting. (Too much pressure on the film can cause defects.)
■Manufacturing standard
|
Film Type
|
TKW-R(SBQ Type) |
|
Emulsion thickness
|
15、20、25、35 |
|
Roll width
|
640mm、1000mm |
|
Sheet size
|
200x200mm〜1000x1000mm |
|
Paste Emulsion
|
KBS-686 ‧ KBS-691 ‧ Water |
※Emulsion film thickness and sheet size can be manufactured upon consultation.
