S117
Applicable to PCB, mobile glass, printing and other industries of screen production. Such as PCB screen, text screen, solder mask screen, mobile phone glass screen, dot screen, etc. No film. One-key work mode, automatic fix screen frame. Features: high output; support large panel, large tolerance in size and height; the number of hanged line is big; high quality imaging.
| Spec | S117 |
| Minimum Size (mm) | 400mm x 400mm |
| Minimum Size (mm) | 1200mm x 1200mm |
| Minimum Size (mm) | 45mm |
| Minimum Size (mm) | If < 25um, should use the heel blocks. |
| Exposure Time | 148s@20W / 1000mm * 1000mm |
| Critical Dimension | 50um（Minimum Line Width or Space Width） |
| Maximum Image Size | 1100mm x 1100mm |
| Maximum Line Number per in | 130LPI |
| Light Power | 20W@320mA [15W@320mA | 25W@320mA] |
| Light Wavelength | 405nm±5nm |
| DMD Style | XGA(X，1024×768)、1080P(F、1920×1080) |
| Light Source Style | LD (Laser Diodes) |
| DOF | ±300μm |
| Format | 274X/D、tiff |
| Active Focus | Support |
| SPEC | L 2930mm W 1960m H 1595m (The actual size depends on the equipment) |
| Weight | 3500KG |
| 2nd Floor bear | > 600kg/m² |
| Optional Function | (Energy Monitor) (Makeup) (Energy Automatic Adjustment) (DXF Support) (VIP/All Parts) |
| Warranty Period | 12 Months after shipment |
・The design of double telecentricity optical system guarantees sufficient depth of field to tolerate flatness errors, and the lens distortion coefficient is less than one thousandth of a million to ensure the quality of the image.
・The design of large-stroke active focus, it meets different plate thickness, and ensures that the distance between the focal plane of the optical system and the base exposure surface is constant during exposure.
・High-precision silent guideway not only reduces noise, but also ensures the real-time accuracy of motion.
・Cast iron frame base is designed to isolate the vibration caused by human operation and avoid its interference to the motion system.
・Efficient isolation design adopts imported high-density isolation materials to effectively isolate the vibration between the base and marble to ensure the stable of the equipment.
・The water-proofing design of the pallet surface can introduce the residual water in the net frame into the water diversion tank, which greatly reduces the risk of accidental damage to the equipment.
・The design of sliding tray foot not only guarantees wide support for various height and width of the screen, but also can tightly fix the screen to prevent it from sliding in motion.
・The integrated design of job software and exposure software can design job when espousing to improve work efficiency.
・The Compact electronic control system which is small size, light weight and good shielding effect is placed at the end of the machine and easy to maintain and install.
・With Optimized software algorithm, single computer can control the entire equipment, reduce the failure point, improve the stability.
・Efficient data processing module ensures that every position in the exposure process can accurately generate the corresponding graphics and complete accurate graphics projection.
・Double emergency switch is designed to ensure personal safety.
・High efficiency and compact laser module can not only support up to 25W, but also adopt optimized protection circuit design and increase memory function, which not only prolongs the service life of laser, but also greatly improves the utilization of light and output power, reduces maintenance cost and reduces maintenance time.
・High-density data resolution (12700 dpi, 25400 dpi) is designed to ensure the sharpness and uniformity of output lines.
| Item | Requirement |
| Temperature | 22℃±2 |
| Humidity | 50% RH±5% |
| Vibration | VC-B |
| Cleanness | Level 10000 or better. |
| Power | Single-phase three-wire system: AC220V(±5%),50/60Hz(based on equipment specifications) ; three-phase five-wire system: 380VAC (±5%), 50/60Hz(based on equipment specifications); |
| Ground wire | MUST |
| Air supply | Dry compressed air: 10L/min, 0.6MPa; Power cable and data transmission line should be fixed with a clasp. |
| Netware | If NetWare is necessary, RJ45connectors and available IP should be prepared in advance. |
| Transport Path | ≧Equipment Width + 200mm；Ensure that the equipment could be passed through. |
